UK Nissan Cube Owners Club

all your base are belong to us

• Forum
• BUY STICKERS

1. 

   Dave

   Location: Keighley, West yorkshire

   cube fanatic
   Joined: Sep '08
   Posts: 132

   I serviced my Cube over the weekend, did the Oil & Filter, Sparks and K&N Air filter. Nothing unusual in it's self.

   However the first thing I did was to replace the Air filter, then take it out for a short run to warm the oil up before I changed it and found the car changed up from 1st to 2nd alot more smoothly on a cold start. I though I would bring this up as I know we have discussed this cold start change up lurch issue before on the fourm some time back, with concerns about failing gearboxes, bad ATF fuilds, etc.

   This might be an answer to the problem, if it bugs you like it did me. I did fit a new factory air filter about year ago and did not notice the change with that one. I will monitor it over the next few months and keep you all posted if the issue re-occurs.

   Posted 2 months ago #
2. 

   mini bus

   Location: Sydney , Australia

   member
   Joined: May '10
   Posts: 17

   nice one
   might give that a go myself

   can you give me the part number for the k & n filter please

   Posted 2 months ago #
3. 

   Rickfury

   Location: bournemouth

   club mod
   Joined: Sep '08
   Posts: 589

   http://forum.cubeownersclub.co.uk/topic/429

   
   -=Exodus-Gaming=-
   -=MusicVids=-

   Posted 2 months ago #
4. 

   Eurobob

   Location: Torfaen, South Wales.

   cube fanatic
   Joined: Apr '09
   Posts: 440

   K&N rule!

   Posted 2 months ago #
5. 

   T111MYO

   Location: Wiltshire

   member
   Joined: May '10
   Posts: 80

   you think a custom cone filter would change this too??

   Tim

   Posted 2 months ago #
6. 

   Rickfury

   Location: bournemouth

   club mod
   Joined: Sep '08
   Posts: 589

   Do you mean like what EB has ??

   rf

   
   -=Exodus-Gaming=-
   -=MusicVids=-

   Posted 2 months ago #
7. 

   T111MYO

   Location: Wiltshire

   member
   Joined: May '10
   Posts: 80

   not sure if ive seen anyone on here with one so i cant be know for sure buddy

   Something like in this link for instance:
   http://www.f5air.com/images/complete_parts/sr1923.jpg

   Tim

   Posted 2 months ago #
8. 

   Rickfury

   Location: bournemouth

   club mod
   Joined: Sep '08
   Posts: 589

   Well if you got the 1.5 engine then thats whet EB has
   But he had to tape some of it up ,due to high fuel consumption : / .

   IF!!! its the same as what i got , id say go for the panel KnN as it does a good job ,unless you want looks,
   rather than functional!!

   rf

   
   -=Exodus-Gaming=-
   -=MusicVids=-

   Posted 2 months ago #
9. 

   T111MYO

   Location: Wiltshire

   member
   Joined: May '10
   Posts: 80

   na id rather keep the little engine hidden its embarrasing, lol jokes.

   Mine is the 1.4 engine

   I may ask my mate to see if he can get me a filter sorted, if not i will just go for a panel filter as they are better.

   I have saved quite a bit so hopefully i can get all my bits within the next few weeks, if not it will be the next few months but want to have it ready for when i go to USC at santapod later in the year

   Tim

   Posted 2 months ago #
10. 

    Eurobob

    Location: Torfaen, South Wales.

    cube fanatic
    Joined: Apr '09
    Posts: 440

    Yup, both ways will improve performance a bit plus engine breathes easier IMOP, that pic you put up has an induction pipe setup too, around 250 notes roughly but cant get them sort for 1.5 CVT cubes in UK and USA plonka i emailed said they cant be arsed to post to UK! Would have just bolted on as well!
    Ron had K&N filter on his up Japfest but i think it uses more go-go juice when installed!

    Posted 2 months ago #
11. 

    T111MYO

    Location: Wiltshire

    member
    Joined: May '10
    Posts: 80

    yea i got mate who does custom filters for mainly german cars and he will make one on for about £50-100 tops i would think so im happy, he is getting my coilovers sorted as we speak then he has to take the beast away and get new plates made to fit it

    Cant wait for that to happen, will get some pics of before and after on all the bits and of my car and post it soon

    Tim

    Posted 2 months ago #
12. 

    Dave

    Location: Keighley, West yorkshire

    cube fanatic
    Joined: Sep '08
    Posts: 132

    Well one month on and still got a nice smooth change up when cold, also dosen't need to push as hard to keep the speed up the motorway hills, so it is a big thumbs up form me for K&N.

    FYI its just the replacement planel filter P/N: 33-2060

    Posted 1 month ago #

RSS feed for this topic

Reply

You must log in to post.