2004 z11 cube airbag light and heater not working

edited April 2017 in Cube Owners Club
Hi all, <div><br></div><div>I am new here and I own a 2004 z11 cube and love it but its so hard to find information on this thing so was hoping someone here can help me. </div><div><br></div><div>Few weeks ago due to rain my cube of flooded... everything seems to work fine except i noticed 2 things.</div><div><br></div><div>1. Airbag light is on. I have reset it and run a scanner on it and it has come up with 3 codes B1044 B1045 and B1012. its something to do with the control unit? </div><div>2. the heater has completely stopped working. The AC works fine but when on heat it just blows cold air. Could it be the fuse? </div><div><br></div><div>Thanks in advance any bit of info will help. </div>


  • Has it got climate control or just manual heater settings
  • Contact Dan at First choice car imports for the airbag control module.<div><br></div><div>As for the heater there is a little lever actuator on the bottom on the left hand side. Remove the glove box to find it, the actuator snaps off and if so the heater can't swap between hot and cold air flows. you can however flick the switch manually so flick to hot for the winter and cold for the summer. This can't be fixed so you'll need a dash out unit replacement job. If you fancy it give Dan a bell as he may have one from a breaker that you could swap in.</div>
Sign In or Register to comment.