gen 3 wishbone replacement

anyone replaced rh wishbone on a kaizen ?<div>looks straightforward apart from front stabilizer to subframe also mounts </div><div>wishbone bush.</div><div>any advise will be appreciated.</div><div>thanks , ic1.</div>


  • not replaced it but I've stripped it all to lower the car. can't see it being that hard to get the last bits I didn't do off but be warned you'll need a fair amount of penetrating oil and rust release for the japanese superglue in all likely hood!
  • done it yesterday.<div>pretty straight forward.</div><div>subframe must be supported at front of car or front of s/frame will drop</div><div>& inner bolt will either not come out or strip its threads.</div><div>note! threads on all wishbone bolts is jap metric fine.</div><div>no goo on any of my bolts.</div><div>thanks for the reply.</div><div><br></div><div><br></div>
Sign In or Register to comment.